Knap On Crane Manual Hydraulic

Lift compactors and other heavy equipment in and out of your van, flatbed or trailer with a simple hand pump. Lifting capacity is up to 400 kg, and the base model needs no power at all. The crane fits our universal baseplate, so you can move it between vehicles.

  • Lifting capacity: 350–400 kg
  • Dead weight: 40–46 kg
  • Boom reach: 1,010–1,550 mm
  • Lifting: Manual hydraulic pump
  • Hoist: Fixed chain or electric wire hoist (14 m)
  • Power: None needed on item no. 4300 · 12V, max 57A on models with electric wire hoist
  • Mounting: Fits all Knap On baseplates, no tools needed
  • CE approved · Made in Denmark
Contact Get a Quote

Choose your configuration

On all three models, the boom is raised with a manual hydraulic hand pump. They differ in lifting method, boom extension and capacity.

Item no. Lifting capacity Hoist Boom extension Boom reach Power Weight Folded (W x H)
4300 400 kg Fixed chain Manual 1,200 mm None 40 kg 510 x 1,140 mm
4400 350 kg Electric wire hoist, 14 m Manual 1,200 mm 12V, max 57A 42 kg 510 x 1,095 mm
4500 350 kg Electric wire hoist, 14 m Electric 1,010–1,550 mm 12V, max 57A 46 kg 510 x 1,095 mm

What can it lift?

The crane is made for heavy equipment that has to go in and out of the vehicle every day. Fit the right lifting tool and it handles tasks like:

  • Plate compactors and other construction equipment
  • 60-litre canisters, car batteries and steel drums
  • Quarter and half pallets on and off flatbeds and trailers
  • Tools, machine parts and materials that are too heavy to lift by hand

 

One crane, many places: the universal baseplate system

You don’t need a crane for every vehicle. You only need a baseplate.

How it works:

  1. Install a baseplate wherever you want a lifting point: in a van, on a flatbed, on a trailer or in the workshop.
  2. Place the crane in the baseplate. It locks into place without tools.
  3. Lift the crane out when the job is done, and place it in a baseplate somewhere else.

Example: Install a baseplate in the van, one on the trailer and one in the workshop. One crane covers all three places. You move the crane, not the load.

 

Baseplates for every setup:

  • Above the cargo floor: standard 50 x 40 cm or compact 40 x 40 cm
  • Below the cargo floor: for a flat floor with no parts sticking up
  • Vertical baseplate: for walls and the sides of machines
  • Concrete block or crane trolley: a movable lifting point on site or in the workshop
  • Custom baseplates: made to fit your specific vehicle or trailer

All Knap On Cranes fit the same baseplate.

 

Why choose it

  • Works without power: item no. 4300 runs on the hand pump alone, with no wiring and no drain on the battery
  • Up to 400 kg: the highest lifting capacity in the Knap On range
  • Fewer heavy lifts: the crane takes the load, not your back
  • One crane, several vehicles: move it between baseplates in vans, flatbeds and trailers

 

Get advice on the right crane

We have more than 30 years of experience developing lifting equipment for construction and civil engineering. Tell us what you need to lift, and we’ll help you find the right model. 

Call +45 98 66 92 69 or email asp@asp-produkt.dk

CE-approved

Operation

Weight

Hoist

Løftefunktion

,

Løftekapacitet

350 kg, 400 kg

Fits all baseplates

Voltage/Power consumption

Crane extension

,

Country of manufacture

Didn't find what you were looking for?

Contact us

We respond within 24 hours on weekdays.
Sign up for our newsletter